If the issue persists, Use the following steps to open the Component Tests menu and run a test on Network. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key. Your Component Tests menu might be different, depending on the components installed on your computer. Network Test – This test checks the network controller. To run this test, connect to a network with a network cable.

I’ve tried this service pack, butr still te same. When I do the networktest i get the following message: transelation from dutch : UEFI networks do not appear to be supported or enabled on the system. Check the bios settings to make sure the uefi network option menus are enabled and the uefi network start is enabled. I went to the bios and enable the networkadaptor. But then the test doesn’t run anymore.

Tried to update the bios, but dind’t do it fault. Let’s start off by performing a Hard reset on the notebook :. Disconnect or remove all peripheral devices. Start up the laptop and test the computer by itself, and then reconnect one peripheral device at a time. If there is a battery compartment, use the steps in Reset a laptop with a removable battery.

If there is no battery compartment, use the steps in Reset a laptop with a sealed or non-removable battery. I recommend restoring the BIOS defaults. That way it will look at the Hardware installed on the Notebook. Download and install the troubleshooter from this link.

If not check this link out: Common fixes for wireless connectivity issues. Next thing, I would suggest here is to uninstall the wireless drivers from the device manager:. Also, download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC. Refer this link to know how to use HP support assistant.

If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers! I tried this a few times in de last koppel of weeks, but it give’s no solutin.

Sometimes the laptop works with WIFI, somethimes i doesn’t and the problerm is stil the same as in the beginnig. It always works with a network cable. Most of the intermittent WiFi disconnection issues can be resolved by installing the appropriate wireless driver and disabling power management settings.

Let’s try these steps:. In Windows, search for and open “Device Manager”. Double-click “Network Adapters”. Right-click the Broadcom wireless and select “Uninstall”. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Broadcom Bluetooth 4. Description Free Download. The package provides the installation files for Broadcom Bluetooth 4. If the driver is already installed on your system, updating overwrite-installing may fix various issues, add new functions, or just upgrade to the available version.

Therefore, if you wish to apply this package, click the download button, and setup the wireless card on your system. It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Description Free Download. The package provides the installation files for Broadcom BCM If the driver is already installed on your system, updating overwrite-installing may fix various issues, add new functions, or just upgrade to the available version.

 
 

Broadcom bcm43142 driver windows 10 download. Broadcom BCM43142 802.11 bgn Wi-Fi Adapter Wi-Fi device drivers

 

Please makesure that you check the box “Delete driver software for this device”. Download and install the Broadcom Wireless driver available here. Once you install the driver, use the following steps to disable wireless power management:.

I am an HP Employee. Didn’t find what you were looking for? Ask the community. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for.

Search instead for. Did you mean:. Fix Windows 10 Update Issues. Create an account on the HP Community to personalize your profile and ask a question. Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again. All forum topics Previous Topic Next Topic. New member. Message 1 of HP Recommended. Operating System: Microsoft Windows 10 bit. Hey When I am working with the laptop for a while my Wi-Fi connection disappears and I can not connect to any wireless network.

In many cases, the windows also blocks. This problem occurs after the installation of Windows I have already tried the solutions offered here driver reintroduced on the forum. Now I have read on another forum that the problem can be solved by installing the driver for windows 8.

Someone experience? What should I do exactly? Tags 1. Tags: Microsoft Windows 10 bit. HP Support Agent. Message 2 of Keep me posted, Have a great day! Message 3 of Message 4 of Hold the power button for at least five seconds to turn off the computer. On the main menu, click Component Tests. The Component Tests menu displays.

To run the test, click Network, and then click Run Once. The Network test time is 1 minute. Keep me posted, how it goes! Have a great day! Message 5 of Hey Ray I’ve tried this service pack, butr still te same. Can i do something else. Mij notebook wordks perfectly with an networkcable. Kind regards and thanks in advance. Message 6 of Turn over the computer and look for a battery compartment door.

Once done, restart the computer and check. Next thing, I would suggest here is to Run Windows Updates troubleshooter – Download and install the troubleshooter from this link. Then restart the computer and check if you are able to go online.

Message 7 of Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. Fix Windows 10 Update Issues. Create an account on the HP Community to personalize your profile and ask a question. Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again. All forum topics Previous Topic Next Topic. New member. Message 1 of 7. Broadcom BCM HP Recommended. Product: hp pavillion gca. Operating System: Microsoft Windows 10 bit. Is there another driver that would rectify this? Tags 4. Level Message 2 of 7.

 

Broadcom bcm43142 driver windows 10 download –

 

Free Drivers Scan. Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones. Extract the. Right click on the hardware device you wish to update and choose Update Driver Software 4.

Choose to select the location of the new driver manually and browse to the folder where you extracted the driver 5. If you already have the driver installed and want to update to a newer version got to “Let me pick from a list of device drivers on my computer” 6. Click “Have Disk” 7. Browse to the folder where you extracted the driver and click Ok About Wireless LAN Driver: Windows OSes usually apply a generic driver that allows systems to recognize the wireless component.

It is worth noting that in order for the automatic update to work, the computer must be connected to the Internet perhaps when connecting the Broadcom device the computer temporarily did not have the Internet connection or a WiFi signal was weak making it impossible to download the Broadcom BCM Wi-Fi Adapter Wireless Driver 7.

To make sure, disconnect now and reconnect the Broadcom device again, and maybe this time the driver will be downloaded. Install the driver manually This solution may seem more complicated – but it is nothing further from the truth.

It is very important that the Broadcom devices connected to your computer had their current drivers installed. You will also learn why it is so important to have current Broadcom drivers. If this has not happened, you should take the following steps: 1.

Check if the automatic update is enabled It is the automatic update feature that is responsible for the installation of the Network Card Broadcom drivers on your computer. It is worth noting that in order for the automatic update to work, the computer must be connected to the Internet perhaps when connecting the Broadcom device the computer temporarily did not have the Internet connection or a WiFi signal was weak making it impossible to download the Broadcom BCM Wi-Fi Adapter Wireless Driver 7.

 
 

– Broadcom bcm43142 driver windows 10 download

 
 

Therefore, if you consider installing this version, click the download button, install the package, and enjoy the benefits of the wireless Bluetooth technology. Moreover, if you want to stay up to speed with the latest updates, check with our website as often as possible. It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.

Problems can arise when your hardware device is too old or not supported any longer. Broadcom Bluetooth 4. Description Free Download. The package provides the installation files for Broadcom Bluetooth 4. If the driver is already installed on your system, updating overwrite-installing may fix various issues, add new functions, or just upgrade to the available version.

Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones. In order to manually update your driver, follow the steps below the next steps : 1. Extract the. Right click on the hardware device you wish to update and choose Update Driver Software 4. Choose to select the location of the new driver manually and browse to the folder where you extracted the driver 5. If you already have the driver installed and want to update to a newer version got to “Let me pick from a list of device drivers on my computer” 6.

Click “Have Disk” 7. All rights reserved.