Sometimes you may encounter such situation that Windows 10 not booting after upgrade. This can be annoying if not knowing how to fix but to reinstall Windows 10 directly. We are to help you fix Windows 10 not booting issue in this article. It can be a serious issue because a large number of users don’t know how to fix but reinstall, leading to data loss if they do not know how to reinstall Windows 10 without deleting personal files. In this post, we show you how to fix Windows 10 startup problems without losing data.

Important: Before starting, back up your files first! As we all know, data loss can happen during the process of fixing Windows 10 boot failure due to impropriate operations. So it is really important to back up data on the system drive first.

With this partition manager, you can easily clone the system disk or back up data partition in WinPE. Step 1: First of all, please get MiniTool Partition Wizard Pro on a normally running computer by clicking the button below:.

Buy Now. Step 2: Then please refer to the tutorials below to create a bootable media on the normally running computer and boot the issue PC from this bootable media:. Step 3: On the main interface of MiniTool Partition Wizard, select the system disk and choose ” Copy Disk ” feature to clone all data on the system disk to another hard drive.

You should know that the target disk will be cleaned for a successful clone, so make sure you are selecting the right disk. Then follow the wizard to finish copying the system disk easily. MiniTool Partition Wizard is really a partition magic that helps back up hard drive even though Windows 10 won’t boot and keeps spinning circle. You even don’t need to worry about its operation because of its user-friendly interface and clear wizard. Click to tweet. In this part, we list 8 suggestions to help remove Windows 10 infinite loading issue.

However, before you start, it is better for you to prepare a Windows 10 installation disc which is very helpful in the following content. The first thing we think you can have a try is to boot the computer into the recovery environment to perform a startup repair. And here are two ways for you do to so:. Set PC to boot from the installation disc and wait for Windows to load files. When you see the Windows Setup interface, select the language, time and currency format, keyboard or input method and click Next.

In the next page, click ” Repair your computer “. Finally, choose a target operating system and then Windows will start diagnosing your system. If any problem is detected, Startup Repair will attempt to fix. To access the recovery environment, turn your computer on and off for three times make sure each time you turn off the computer when you see the Windows logo.

After the third time, Windows 10 will boot into Diagnostics mode. Please click ” Advanced options ” when the Automatic Recovery screen appears.

Now you can choose a target operating system to repair and Windows will begin the diagnosing and try to fix startup problems. If the problem insists, you may consider whether the MBR is damaged due to malware infections or improper shutdowns. Step 2: Type in the following commands one by one and press Enter key after each of them.

This suggestion is put forward by a user from answers. Please get ready for the world’s simplest fix to this issue. If you have recently made any change in BIOS and then started facing this problem, maybe you can fix Windows 10 not booting issue by reverting the change or resetting BIOS settings to default values. Step 1: To open BIOS settings, you need to restart your computer and keep pressing F2 or F12, Delete or the similar based on the motherboard manufacturer.

Step 2: Once there, you are likely to see a key at the bottom that says F9 – Setup Defaults. On some machines, you may find this option under the Security tab and the option is named Restore Factory Defaults or Reset All Settings. So be sure to have a look around to find the right place. Apart from the third-party drivers, an official Windows update can also break your system, making Windows 10 not booting after update. If you have recently installed any Windows Update and then the problem comes, you can start PC in Safe Mode and uninstall that update.

When the command is running successfully, close the command prompt and choose Continue. Boot your computer with the USB recovery drive, select your keyboard layout and then choose Troubleshoot on the next screen. You might also be interested in 7 ways to boot into Safe Mode in Windows Once you get into Windows, you can just head to Programs and Features and click on ” View installed updates ” in the left-hand pane of the window.

Then you should carefully select the problematic update and click the Uninstall button. We kindly suggest you distinguishing the updates by observing the name and date.

If all of these solutions do not help fix Windows 10 not booting issue, you may consider following either Fix 6 or Fix 7 according to your real situation. How to restore windows 10 to an earlier date? This will not delete any personal file, but you may find the same app settings are also reverted to the former settings. Step 2: Next, select a system image backup. Here the latest available system image is checked by default. But you can also select a system image by yourself and then click Next.

Step 3: Don’t check Format and repartition disks option. It will delete everything on your computer hard disk and repartition your hard disk. Just click Next to continue. Step 4: On the final stage of Windows system restoration, please click Finish.

Then you will receive a warning message saying “All data on the drives to be restored will be replaced with the data in the system image. Are you sure you want to continue? Step 5: The restoring process will take some time to restore all system and user files.

Please wait patiently and do not turn off your computer during system image recovery. When the restoring process has been finished, system will restart. Your next best option is to try salvaging your data and then reinstalling Windows 10 and your applications.

We have recommended MiniTool Partition Wizard Pro at the beginning, assisting you with the system disk backup, so you don’t need to worry about data loss caused by mistaken operation.

Now with Windows 10 install media, you can boot PC from it and then perform a clean install which erases everything or custom install which keeps your files there.

Above are the top 8 solutions to fixing Windows 10 won’t boot up issue. Hope you will never take the last one. Finally, we strongly suggest making schedule backup of your system disk in case your Windows 10 won’t boot after update.

Do you have any tips for users unable to boot Windows 10? Contribute a solution, ask for help, or simply join the conversation in the comments section below! If you encounter any problem while using MiniTool software, you can send an email to [email protected]. Much appreciated! Download Partition Wizard.

Summary : Sometimes you may encounter such situation that Windows 10 not booting after upgrade. Select the system disk and choose ” Rebuild MBR ” from the action panel.

Finally, click “Apply” on the toolbar to put the operation into effect. Now exit the MiniTool bootable media and check if Windows 10 boot failure disappears. Tip: 1. Windows 10 startup problems should be solved then!

 
 

 

Windows 10 cannot boot after update free download. How Do I Fix Windows 10 Not Booting after Update with 8 Solutions [Partition Magic]

 

I was running on the RTM version of Win 10 build and tried to update to the current version, both through the Windows automatic update and by downloading the latest ISO, burning it to a DVD, and running it from within Windows.

Both times, the reinstall ended when the computer restarted automatically and displayed the message:. GRUB is the Linux bootloader. I’m dual booting with Linux Mint, 64 bit. My bootloader was apparently damaged by the update. What can I do to fix it? The bootloader was installed along with the Linux OS. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.

Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect.

Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.

Based on your information, the issue seems like the Linux operating system is trying to boot at the start up and it is unable to boot due to unknown file system. If you are able to boot in Windows 10 and if you want to boot the Windows at first, go to msconfig and select Windows operating system.

Click on Boo t tab and select Windows operating system. Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. I suggest you to use the below command to repair the Boot loader for Ubuntu and check. If the issue still persist, I suggest you to use Bootrec. This option writes a Windows 10 MBR to the system partition.

It does not overwrite the existing partition table. Use this option when you must resolve MBR corruption issues, or when you have to remove nonstandard code from the MBR. This option writes a new boot sector to the system partition by using a boot sector that’s compatible with Windows Use this option if one of the following conditions is true:.

This option scans all disks for installations that are compatible with Windows It also displays the entries that are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7 installations that the Boot Manager menu does not list.

Additionally, it lets you select the installations that you want to add to the BCD store. Use this option when you must completely rebuild the BCD store. Note Use the Bootrec. If rebuilding the BCD store doesn’t resolve the startup issue, you can export and delete the BCD store and then run this option again.

By doing this, you make sure that the BCD store is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:. Thank you for the help. I finally fixed it myself by using the Boot-Repair Disk, a Linux bootable disk. I did try the bootrec options several times without success. I also tried renaming and then rebuilding the BCD without success, but these steps might have been important to helping Boot-Repair Disk to finally succeed.

Thank you for keeping us updated and we appreciate the troubleshooting steps you have performed. If you need further assistance with Windows in future, let us know and will be happy to help. Details required : characters remaining Cancel Submit. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Both times, the reinstall ended when the computer restarted automatically and displayed the message: error: unknown filesystem.

Entering rescue mode. I have the same question Report abuse. Details required :. Cancel Submit. Billion Debbarma.

Hi, Welcome to Microsoft Community. I understand your concern. I will do my best to fix the issue. Click on Apply and Ok. Hope this helps. Let us know the status. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to Billion Debbarma’s post on March 28, I’m sorry. I wasn’t clear enough. Apparently, the update has broken the bootloader. Typing exit and pressing Enter does nothing.

There is no blinking cursor. I can’t get into Windows or Linux. How do I fix the bootloader so that I can get into Windows or Linux? In reply to prestonpdx’s post on March 28, Hi, Thank you for coming back to us. Use this option if one of the following conditions is true: The boot sector was replaced with a nonstandard Windows boot sector. The boot sector is damaged. In reply to Billion Debbarma’s post on April 7, In reply to prestonpdx’s post on April 8, Hi, Thank you for keeping us updated and we appreciate the troubleshooting steps you have performed.

This site in other languages x.

 
 

PC won’t boot after lastest Windows 10 update – Microsoft Community

 
 
Step 2: Then please updae to the tutorials below to create a bootable media on the normally running computer and boot the issue PC from this bootable media:. But sometimes you may encounter computer won’t start after Windows update http://replace.me/5963.txt, for example, the major October update brought a slew of issues, like the dreaded Blue Screen of Death BSoD error message, and some driver compatibility problems. If the folder has disappeared in Windows 10, 11 If Windows 10, 11 Installation is Stuck What should you do if Windows 10, 11 settings won’t open? After creating a disk image, you читать далее go windows 10 cannot boot after update free download to reinstall Windows 10, 11 on the computer. You can also connect the power cable to a wall outlet. Microsoft must release a fix for this problem.